Casio Watch MA1310 EA User Manual

MA1310-EA  
© 2013 CASIO COMPUTER CO., LTD.  
Operation Guide 3426  
About This Manual  
Contents  
Depending on the model of your watch, display text  
appears either as dark figures on a light background or  
light figures on a dark background. All sample displays  
in this manual are shown using dark figures on a light  
background.  
General Guide.......................................................................................................... E-4  
Timekeeping............................................................................................................. E-6  
Stopwatch .............................................................................................................. E-11  
Preset Timer........................................................................................................... E-16  
Countdown Timer.................................................................................................. E-20  
World Time............................................................................................................. E-26  
Alarm ...................................................................................................................... E-28  
Illumination ............................................................................................................ E-31  
Reference ............................................................................................................... E-32  
Specifications ........................................................................................................ E-38  
E-1  
Button operations are indicated using the letters shown  
in the illustration.  
Each section of this manual provides you with the  
information you need to perform operations in each  
mode. Further details and technical information can be  
found in the “Reference” section.  
E
Procedure Lookup  
To view the time for another city code................................................................ E-26  
The following is a handy reference list of all the operational procedures contained in  
this manual.  
To toggle a city code time  
between Standard Time and Daylight Saving Time........................................ E-27  
To set the time and date ......................................................................................... E-7  
To toggle the Timekeeping Mode time between DST and Standard Time ......... E-9  
To toggle between 12-hour and 24-hour timekeeping ....................................... E-10  
To measure times with the stopwatch................................................................. E-12  
To set the event time............................................................................................. E-14  
To start timing at the beginning of an event....................................................... E-14  
To pause timing..................................................................................................... E-15  
To reset elapsed time measurement to zero....................................................... E-15  
To perform a preset timer operation.................................................................... E-17  
To configure countdown timer settings.............................................................. E-21  
To perform a countdown timer operation ........................................................... E-24  
To set the alarm time............................................................................................. E-28  
To stop the alarm tone after it starts to sound .................................................. E-29  
To switch the Daily Alarm and Hourly Time Signal on and off ......................... E-30  
To test the alarm.................................................................................................... E-30  
To illuminate the display....................................................................................... E-31  
To turn the button operation tone on and off ..................................................... E-34  
E-2  
E-3  
General Guide  
Press C to change from mode to mode.  
In any mode (except when a setting screen is on the display), press B to illuminate  
the display.  
Timekeeping Mode  
Stopwatch Mode  
Preset Timer Mode  
Countdown Timer Mode  
World Time Mode  
Alarm Mode  
C
C
C
C
C
C
E-4  
E-5  
To set the time and date  
Timekeeping  
1. In the Timekeeping Mode, hold down A until the  
seconds start to flash, which indicates the setting  
screen.  
2. Press C to move the flashing in the sequence shown  
below to select other settings.  
Use the Timekeeping Mode to set and view the current  
time and date.  
Month – Day  
Day of week  
Read This Before You Set the Time and Date !  
The times displayed in the Timekeeping Mode and World  
Time Mode are linked. Because of this, make sure you  
select a city code for your Home City (the city where you  
normally use the watch) before you set the time and date.  
For full information on city codes, see the “City Code  
Table” at the back of this manual.  
C
C
C
C
C
C
Seconds  
DST  
City Code  
Year  
Hour  
Seconds  
Hour : Minutes  
Day  
Month  
Minutes  
C
C
PM indicator  
E-6  
E-7  
3. When the setting you want to change is flashing, use D and B to change it as  
Daylight Saving Time (DST)  
described below.  
Daylight Saving Time (summer time) advances the time setting by one hour from  
Standard Time. Remember that not all countries or even local areas use Daylight  
Saving Time.  
Screen  
To do this:  
Do this:  
Reset the seconds to  
Press D.  
To toggle the Timekeeping Mode time between DST and Standard Time  
Toggle between Daylight Saving Time (  
)
1. In the Timekeeping Mode, hold down A until the  
seconds start to flash, which indicates the setting  
screen.  
2. Press C to display the DST setting screen.  
3. Press D to toggle between Daylight Saving Time (  
and Standard Time (  
)
Change the city code  
Use D (east) and B (west).  
Use D (+) and B (–).  
Change the hour or minutes  
Change the year  
displayed) and Standard Time (  
4. Press A to exit the setting screen.  
displayed).  
Change the month or day  
The DST indicator is on the display while Daylight Saving  
Time is turned on.  
DST indicator  
See “Daylight Saving Time (DST)” on page E-9 for details about the DST setting.  
4. Press A to exit the setting screen.  
E-8  
E-9  
 
Operation Guide 3426  
You can turn on an auto-repeat feature that restarts the timer sequence from the  
Countdown Timer  
beginning when the end of the last timer is reached.  
With the countdown timer, you can set up to nine start  
times, which are counted down in sequence one after the  
other.  
All of the operations in this section are performed in the Countdown Timer Mode,  
which you enter by pressing C (page E-5).  
Timekeeping Mode time  
Countdown timer  
number  
The countdown timer can be used for interval training (for  
To configure countdown timer settings  
example, three minutes running with  
with , five minutes running with  
, 1 minute rest  
1. In the Countdown Timer Mode, hold down A until the  
countdown timer number starts to flash.  
This is the setting screen.  
2. Use D (+) and B (–) to scroll through the countdown  
timer numbers until the one you want to set is displayed.  
) or for timing an  
multi-period event (for example, 45 minutes of play with  
, 15 minutes rest with  
, 45 minutes play with  
).  
The watch performs an alert operation (beeper) when any  
timer reaches zero.  
An alert operation (about one second) is performed  
when any countdown timer (except for the last one in the  
series) reaches zero. When the last countdown timer in  
the series reaches zero, an alert operation is performed  
for about five seconds.  
Start time  
(Minutes Seconds)  
E-20  
E-21  
4. While a setting is flashing, use D and B to change it as described below.  
D
B
D
D
D
Screen  
To do this:  
Do this:  
Change the countdown timer number  
Use D (+) and B (–).  
B
B
B
B
B
B
B
D
D
B
Change the minutes (  
Change the seconds (  
Toggle auto-repeat on (  
)
, 5-second units)  
) and off (  
D
D
D
)
Press D.  
3. Press C to move the flashing in the sequence shown below to select other  
Any timer whose start time is  
will not be used during the countdown timer  
settings.  
operation.  
There is no auto-repeat for individual countdown timers. In the Countdown Timer  
Mode, auto-repeat repeats the entire set of timers.  
C
C
C
Countdown timer numbers  
Minutes  
Seconds  
Auto-repeat  
C
E-22  
E-23  
The first countdown timer of the series is the lowest numbered one with a start time  
that is not zero. The final countdown timer of the series is the highest numbered one  
with a start time that is not zero.  
While auto-repeat is turned off, the watch beeps when each countdown timer  
reaches zero. An alarm will sound for about five seconds when the final countdown  
timer reaches zero.  
5. Set the times of all of the timers that you want.  
6. Press A to exit the setting screen.  
When auto-repeat is turned on, the number of repeats will  
appear in the lower display.  
Auto-repeat on indicator  
Frequent use of auto-repeat and the alarm can run down  
battery power.  
While auto-repeat is turned on, the watch beeps once when each countdown timer  
reaches zero. A five-second alert operation is performed when the final countdown  
timer reaches zero, unless the start time of the final countdown timer is 10 seconds  
or less. In such a case, the alert operation for the final countdown timer is only one  
second long.  
Number of repeats  
To perform a countdown timer operation  
Timing restarts from the first timer when the final countdown timer reaches zero. The  
number of repeats is displayed in the lower display. The number of repeats display  
changes to “ ” when the count reaches 100.  
In the Countdown Timer Mode, press D to start the countdown of the lowest  
numbered countdown timer that has a start time setting that is not zero.  
To pause the countdown timer that is currently counting down, press D. Press D  
again to resume the countdown.  
An ongoing countdown timer operation continues to be performed even if you exit  
the Countdown Timer Mode.  
To stop a countdown timer operation, first press D to pause the countdown of the  
During a countdown timer operation, any countdown timer whose start time is zero  
current timer, and then press A. This will display Countdown Timer 1 (  
).  
(
) is skipped.  
E-24  
E-25  
To toggle a city code time between Standard Time and Daylight Saving Time  
World Time  
1. In the World Time Mode, use D to display the city code  
(time zone) whose Standard Time/Daylight Saving Time  
setting you want to change.  
World Time shows the current time in 48 cities (29 time  
zones) around the world.  
When you enter the World Time Mode, the data you were  
viewing when you last exited the mode appears first.  
All of the operations in this section are performed in  
the World Time Mode, which you enter by pressing C  
(page E-5).  
Timekeeping Mode time  
City code  
2. Hold down A for about one second to toggle between  
Daylight Saving Time (  
not displayed).  
displayed) and Standard Time  
(
The DST indicator is on the display whenever you display  
a city code for which Daylight Saving Time is turned on.  
Note that the DST/Standard Time setting affects only  
the currently displayed city code. Other city codes are  
not affected.  
DST indicator  
To view the time for another city code  
In the World Time Mode, press D to scroll eastward  
through city codes.  
For full information about city codes, see the “City Code  
Table” at the back of this manual.  
Current time in the zone of  
the selected city code  
If the current time for a city is wrong, check your  
Timekeeping Mode time and Home city code settings and  
make necessary changes.  
E-26  
E-27  
2. Press Cto change the selection in the following sequence.  
Alarm  
C
When the Daily Alarm is turned on, the alarm sounds for  
10 seconds at the preset time each day. When the Hourly  
Time Signal is turned on, the watch beeps every hour on  
the hour.  
Hourly time signal on  
indicator  
Hour  
Minutes  
Alarm on indicator  
3. While a setting is flashing, use Dand B to change it as described below.  
All of the operations in this section are performed in the  
Screen  
To do this:  
Do this:  
Alarm Mode, which you enter by pressing C (page E-5).  
Change the hour and minutes  
Use D(+) and B(–).  
With the 12-hour format, set the time  
correctly as a.m. or p.m. (P indicator).  
To set the alarm time  
1. Hold down A while in the Alarm Mode until the hour  
digits start to flash on the display. The hour digits flash  
because they are selected.  
4. After you set the alarm time, press Ato return to the Alarm Mode.  
This operation automatically turns on the alarm.  
To stop the alarm tone after it starts to sound  
Timekeeping  
Mode time  
Press any button.  
Alarm time  
(Hour : Minutes)  
E-28  
E-29  
 
Operation Guide 3426  
To switch the Daily Alarm and Hourly Time Signal on and off  
Press D while in the Alarm Mode to change the status of the Daily Alarm and Hourly  
Time Signal in the following sequence.  
Illumination  
This watch has an LED (light-emitting diode) panel that  
causes the entire display to glow for easy reading in the  
dark.  
D
D
D
SeeIlluminationPrecautions(pageE-37)formoreimportant  
information.  
Both on  
Both off  
Daily Alarm only  
Hourly Time  
Signal only  
D
To illuminate the display  
In any mode, press B to turn on illumination.  
To test the alarm  
Hold down D while in the Alarm Mode to sound the alarm.  
E-30  
E-31  
Mode  
Graphic Area A  
Graphic Area B  
Graphic Area C  
Reference  
Timekeeping Mode  
minutes  
Stopwatch Time  
minutes  
Timekeeping Mode  
seconds  
Stopwatch Time  
1/20-second  
Timekeeping Mode  
10-seconds  
Stopwatch Time  
10-seconds  
Timekeeping  
This section contains more detailed and technical information about watch operation.  
It also contains important precautions and notes about the various features and  
functions of this watch.  
Stopwatch  
Preset Time  
1/20-second  
Countdown Time  
1/20-second  
Preset Time  
10-seconds  
Countdown Time  
10-seconds  
Graphic Areas  
Preset Timer  
Countdown Timer  
Preset Time minutes  
The following describes the information indicated by the three graphic areas in each  
mode.  
Countdown Time  
minutes  
World Time Mode  
minutes  
World Time Mode  
seconds  
World Time Mode  
10-seconds  
Graphic area B  
World Time  
Alarm  
Graphic area C  
Graphic area A  
No indication  
No indication  
No indication  
E-32  
E-33  
Button Operation Tone  
Scrolling  
The B and D buttons are used in various modes and setting screens to scroll  
The button operation tone sounds any time you press one  
of the watch’s buttons. You can turn the button operation  
tone on or off as desired.  
Even if you turn off the button operation tone, the alarm,  
the Hourly Time Signal, the countdown timer alarm, and  
the event time alarm all operate normally.  
through data on the display. In most cases, holding down these buttons during a scroll  
operation scrolls at high speed. This is true except when the countdown timer number  
is flashing on the Countdown Timer Mode screen (page E-21).  
Auto Return Features  
If you leave the watch in the Alarm Mode for two or three minutes without performing  
any operation, it changes to the Timekeeping Mode automatically.  
If you leave a screen with flashing digits on the display for two or three minutes  
without performing any operation, the watch exits the setting screen automatically.  
To turn the button operation tone on and off  
In any mode (except when a setting screen is on the  
display), hold down C to toggle the button operation tone  
on ( not displayed) and off ( displayed).  
Mute indicator  
Timekeeping  
Holding down C to turn the button operation tone on or off also causes the watch’s  
Resetting the seconds to while the current count is in the range of 30 to 59  
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are  
reset to without changing the minutes.  
current mode to change.  
is displayed in all modes when the button operation tone is turned off.  
The year can be set in the range of 2000 to 2099.  
E-34  
E-35  
The watch’s built-in full automatic calendar makes allowances for different month  
lengths and leap years. Once you set the date, there should be no reason to change  
it except after you have the watch’s battery replaced.  
Illumination Precautions  
Illumination loses power after very long use.  
Illumination may be hard to see when viewed under direct sunlight.  
Illumination turns off automatically whenever an alarm sounds.  
Frequent use of illumination runs down the battery.  
World Time  
The seconds count of the World Time is synchronized with the seconds count of the  
Timekeeping Mode.  
All World Time Mode times are calculated from the current Home City time in the  
Timekeeping Mode using UTC time differential values.  
The UTC differential is a value that indicates the time difference between a  
reference point in Greenwich, England and the time zone where a city is located.  
The letters “UTC” is the abbreviation for “Universal Time Coordinated”, which is the  
world-wide scientific standard of timekeeping. It is based upon carefully maintained  
atomic (cesium) clocks that keep time accurately to within microseconds. Leap  
seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s  
rotation.  
E-36  
E-37  
Countdown Timer  
Specifications  
Accuracy at normal temperature: 15 seconds a month  
Number of Timers: Up to 9  
Measuring unit: 1 second  
Input range: 59'55" (1-minute increments and 5-second increments)  
Other: Auto-repeat timing  
World Time: 48 cities (29 time zones)  
Other: Daylight Saving Time/Standard Time  
Alarm: Daily alarm, Hourly time signal  
Illumination: LED (light-emitting diode)  
Other: Button operation tone on/off  
Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week  
Time format: 12-hour and 24-hour  
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099  
Other: Home City code (can be assigned one of 48 city codes); Daylight Saving  
Time (summer time)/Standard Time  
Stopwatch  
Measuring units: Upper display: 1 second; Lower display: 1 second  
Measuring capacities: Upper display: 59'59"; Lower display: 99'59.99"  
Measuring modes: Elapsed time, event time  
Battery: One lithium battery (Type: CR2025)  
Approximately 10 years on type CR2025 (1 stopwatch elapsed time operation per  
week (10-second alarm when timing reaches preset event time); 1 preset timer  
operation per week (10-second alarm when countdown reaches zero); 1 countdown  
timer operation per week (8 1-second beeps when any countdown timer reaches  
zero, 5-second alarm when last countdown timer reaches zero), daily alarm  
operation 10 seconds per day, 1.5 seconds of illumination per day)  
Preset Timer  
Measuring unit: 1 second  
Preset Start Times: 10, 12, 15, 20, 25, 30, 35, 40, 45 minutes  
Timer modes: Elapsed time, Auto-repeat  
Measurement of elapsed time for up to 60 minutes after the countdown reaches  
zero  
E-38  
E-39  
 
Operation Guide 3426  
City Code Table  
L-1  
City Code Table  
City  
UTC  
City  
UTC  
City  
Other major cities in same time zone  
Papeete  
City  
Other major cities in same time zone  
Code  
Differential  
Code  
Differential  
–11  
–10  
–9  
LIS  
LON  
BCN  
PAR  
MIL  
ROM  
BER  
ATH  
JNB  
IST  
Lisbon  
London  
Barcelona  
Paris  
Milan  
Rome  
0
Dublin, Casablanca, Dakar, Abidjan  
PPG  
HNL  
ANC  
YVR  
Pago Pago  
Honolulu  
Anchorage  
Vancouver  
+1  
+2  
Amsterdam, Algiers, Hamburg, Frankfurt, Vienna,  
Stockholm, Madrid  
Nome  
–8  
Las Vegas, Seattle/Tacoma, Dawson City  
SFO San Francisco  
LAX  
DEN  
MEX  
CHI  
Los Angeles  
Denver  
Mexico City  
Chicago  
Berlin  
Athens  
–7  
–6  
El Paso, Edmonton  
Winnipeg, Houston, Dallas/Fort Worth, New Orleans  
Helsinki, Beirut, Damascus, Cape Town  
Johannesburg  
Istanbul  
Cairo  
Jerusalem  
Moscow  
Jeddah  
Tehran  
MIA  
Miami  
–5  
Montreal, Detroit, Boston, Panama City, Havana,  
Lima, Bogota  
La Paz, Santiago, Port Of Spain  
CAI  
NYC  
CCS*  
YYT  
RIO Rio De Janeiro  
RAI  
New York  
Caracas  
St. Johns  
JRS  
MOW**  
JED  
THR  
–4  
–3.5  
–3  
+3  
Kuwait, Riyadh, Aden, Addis Ababa, Nairobi  
Shiraz  
Sao Paulo, Buenos Aires, Brasilia, Montevideo  
+3.5  
Praia  
–1  
L-2  
L-3  
City  
Code  
UTC  
Differential  
City  
Code  
UTC  
Differential  
City  
Other major cities in same time zone  
City  
Other major cities in same time zone  
DXB  
KBL  
KHI  
MLE  
DEL  
DAC  
RGN  
BKK  
SIN  
HKG  
BJS  
PER  
SEL  
TYO  
ADL  
Dubai  
Kabul  
Karachi  
Male  
Delhi  
Dhaka  
Yangon  
Bangkok  
Singapore  
Hong Kong  
Beijing  
Perth  
+4  
+4.5  
+5  
Abu Dhabi, Muscat  
GUM  
SYD  
NOU  
WLG  
Guam  
Sydney  
Noumea  
Wellington  
+10  
Melbourne, Rabaul  
+11  
+12  
Port Vila  
Christchurch, Nadi, Nauru Island  
+5.5  
+6  
+6.5  
+7  
Mumbai, Kolkata  
Colombo  
*
In December 2007, Venezuela changed its offset from –4 to –4.5. Note,  
however, that this watch displays an offset of –4 (the old offset) for the CCS  
(Caracas, Venezuela) city code.  
** The above is current as of June 2013. This watch does not reflect the change  
in the Moscow (MOW) time offset to +4. Because of this, you should leave the  
summer time setting turned on (which advances the time by one hour) for Moscow  
(MOW).  
This table shows the city codes of this watch.  
The rules governing global times (UTC offset and GMT differential) and summer  
time are determined by each individual country.  
Jakarta, Phnom Penh, Hanoi, Vientiane  
Kuala Lumpur, Taipei, Manila, Perth, Ulaanbaatar  
+8  
Seoul  
Tokyo  
Adelaide  
+9  
Pyongyang  
Darwin  
+9.5  
L-4  
L-5  
 

Black Box Switch 26546 User Manual
Black Decker Juicer CJ625 User Manual
Bostitch Nail Gun RN45B User Manual
Braun Electric Shaver 350CC 4 User Manual
Breville Fryer EW30XL User Manual
Brother All in One Printer RJ 4030 User Manual
Brother Fax Machine FAX 195 User Manual
Campbell Hausfeld Nail Gun CHN50300 User Manual
Carrier Water Dispenser 23XRV User Manual
China Household Electrical Appliance Kitchen Utensil EK300 User Manual